With the trapezoidal thread-driven linear table options, the drylin® SHT product portfolio offers various solutions for many requirements.
drylin® linear tables with steep thread offer very high travel speeds at low rotary speeds. Thereby pitches up to 100 mm per revolution are implemented. The lubricant-free plastic nuts made of iglidur® J thereby run against cold-rolled stainless steel spindles. An interesting alternative to toothed belt axes, especially in the rapid handling of small parts.
The "turn-to-fit" feature allows individual clearance adjustment by hand. The advancement is done in 0.01 mm increments, and cannot accidentally loosen during operation (SLW type series 10-20).
In addition to the standard right-handed lead screws,
left-hand thread lead screws and counter lead screws can also be
used. This option often used in format adjustments can
be specified for all diameters and type series.
When using linear axes of the SHT type series, one can select from the shaft materials - steel, stainless steel, or hard anodized aluminum (standard). The short delivery time and excellent coefficients of friction and wear make the aluminum version the most widely used standard.
Steel and stainless steel versions are available for the trapezoidal threaded spindles. Solutions with hard-coated aluminum spindles are also available on request. Steep threaded spindles and metric threaded rods are always made of stainless steel. The spindle ends are tapered up to the spindle diameter of 14 mm. On request, pins or special machining can be added.
All steep threaded spindles are made of stainless steel. Compared to trapezoidal thread, the steep thread displays significantly higher pitches. So, higher travel speeds are possible, but at a higher drive torque compared to the trapezoidal thread. Available diameter and pitch: 8 x 15, 10 x 12, 10 x 50, 18 x 100.