My contact person
e-chains®, chainflex®, cables, harnessed systems readychain®

+972 3 9269595
Photo
dry-tech® bearing technology

+972 3 9269595
Photo

Bar stock for motion

The round rods made of of the iglidur® range of bar stock can be ordered in individual lengths from 100 mm to 1000 mm and with a diameter of 10 mm to 100 mm. We offer different materials to meet the different requirements of each application. Here, you can find the right round-rod material - whether for low, medium or high speeds, for temperatures up to 250 °C or for mainly stationary or extreme loads, in other words for almost every requirement.
Like every igus® product, the round rods are also suitable for absolutely lubrication-free use and are therefore not only maintenance-free but are also especially hygienic.
For example, iglidur® round rods are used in the area of medical technology and in the food and packaging industry.

Products

Filter

Core Requirements
Requirements
Material

Number of products: 27

iglidur® C500, round bar
  • High resistance to media and temperature
  • Resistant to water vapour
  • Good coefficients of wear and friction

Upon request

Available on request
To the product page
iglidur® J350, round bar
  • Excellent coefficient of friction against steel
  • Continuous service temperature up to +180 °C
  • For medium to high loads
  • Fulfils the fire prevention requirements of the Federal Aviation Administration of the USA (FAA) for aircraft interiors
  • Particularly well-suited to rotating movements

from 75.36 USD / m

Available on request
To the product page
iglidur® J260, round bar
  • Very good coefficient of friction for low or medium loads
  • Good media resistance
  • Long service life – even on polymer shafts and in other special cases
  • Lubrication and maintenance-free

from 83.07 USD / m

Available on request
To the product page
iglidur® JB, round bar
  • Low wear
  • Low coefficient of friction
  • Low humidity absorption
  • Good media resistance

from 57.85 USD / m

Available on request
To the product page
iglidur® A350, round bar
  • For use with temperatures up to +180 °C
  • Comply with the requirements of the FDA
  • For medium to high loads
  • Equally good for both oscillating and rotating applications
  • Fulfils the fire prevention requirements of the Federal Aviation Administration of the USA (FAA) for aircraft interiors
  • Lubrication- and maintenance-free

from 38.02 USD / m

Available on request
To the product page
iglidur® J3, round bar
  • Specialist for pivoting and pulsating loads
  • Good media resistance
  • Low moisture absorption
  • PTFE-free

from 18.69 USD / m

Available on request
To the product page
iglidur® HSD350, round bar
  • Sterilisable
  • For continuous use up to +180° C
  • High media resistance
  • Corrosion-free
  • For wet environments
  • self-lubricating and maintenance-free

from 234.22 USD / m

Available on request
To the product page
iglidur® J2, round bar
  • Good mechanical properties, robust
  • Cost-effective
  • Good media resistance
  • Lubrication and maintenance-free

from 146.97 USD / m

Available on request
To the product page
iglidur® M250, round bar
  • Excellent vibration dampening
  • Resistant to edge loads
  • High impact resistance

from 28.82 USD / m

Available on request
To the product page
iglidur® J, round bar
  • Low wear against a lot of shaft materials
  • Low coefficients of friction during dry operation
  • Vibration dampening
  • Good resistance to chemicals
  • Best performance with soft shaft materials
  • Low moisture absorption

from 10.30 USD / m

Available on request
To the product page
iglidur® T220, round bar
  • Free from ingredients banned or unwanted by the tobacco industry
  • The material complies with food and drug administration (FDA) regulations

from 91.34 USD / m

Available on request
To the product page
iglidur® UW160, round bar
  • Ideal for continuous use in liquid media, especially drinking water (KTW-compliant)
  • Good media resistance
  • Extremely wear-resistant in liquids
  • Lubrication and maintenance-free

from 63.71 USD / m

Available on request
To the product page
iglidur® GLW, round bar
  • Low-cost material for mass production
  • Applications with static loads
  • Cost-effective
  • Dirt-resistant
  • Resistant to vibrations

Upon request

Available on request
To the product page
iglidur® W300, round bar
  • For a long service life during continuous operation
  • Low coefficient of friction
  • Extremely high abrasion resistance
  • Suitable for rugged and stainless-steel shafts
  • Dirt-resistant

Upon request

Available on request
To the product page
iglidur® P210, round bar
  • Low moisture absorption
  • Good coefficients of friction and wear on almost every shaft
  • Good price/performance ratio

from 80.23 USD / m

Available on request
To the product page

Consulting

We would be happy to answer your questions personally

Shipping and consultation

In person:

Monday to Friday from 7 am - 8 pm.
Saturdays from 8 am- 12 pm.

Online:

24h