The ReBeL EduMove is a mobile robot platform equipped with a ReBeL robot arm for a wide range of applications in training and research.
The EduMove can be programmed using the proven
igus Robot Control software, allowing a quick start in mobile robotics. In addition, the CRI network interface with Python library and the open-source ROS2 interface also enable the most demanding research applications.
For the development of your own sensor-based applications, the platform is also prepared for the assembly of various sensors such as e.g. LIDAR on the top or Realsense cameras, both on the front and back and in the 3D-printable side boxes (3D models are available free of charge). The housing also offers enough space to accommodate, e.g. an additional Jetson Nano for computer vision and AI applications.
As an equipment option, the EduMove can also be supplied directly with the ReBeL gripper to start with the first pick-and-drop tasks even faster.
The EduMove requires a 24V battery with an XT60 connector, which is not included in the scope of delivery. We recommend the ENERPOWER 24V battery with 15Ah 12249. This can also be ordered with a charger.
Dimensions: W=435mm / L=445mm / H without ReBeL= 170mm/ H with ReBeL=980mm
