E2 micro ESD e-chains® are very small,
one-piece and two-piece e-chains®
with a low weight and are therefore
ideal for highly dynamic applications.
E2 ESD micro e-chains® are strong and available
in many different versions.
igus® also supplies a wide range of
accessories and means of attachment.
Available inner widths Bi: 16 to 30 mm
Available bend radii R: 18 to 38 mm
Pitch: 20 mm/link = 50 links / m
* The required clearance height is HF = H + 10 mm (at 0,2 kg/m fill weight) We request feedback in the case of particularly narrow space conditions.
** The calculated length corresponds to the chain length without mounting brackets.
A=Moving end, B=Fixed endPitch: 20 mmChain links per m: 50Travel: SChain length = S/2 + K
Unsupported length versus fill weightX axis: Unsupported length in m FLB/FLGY axis: Fill weight in kg/mLower scale: Travel S in mFLB = Unsupported with permissible sagFLG = Unsupported with straight upper run
Reference example A:
Fill weight = 0,5 [kg/m]
Unsupported length FLB = 0,55 m
Travel = 1,1 m The diagrams for unsupported lengths
apply to standard e-chains® in
igumid GLW material. The values can
also be used for assessing
e-chain® applications in ESD special material.
If the respective maximum unsupported length exceeds 80%,
the suitability of the e-chain® should be verified by a practice-oriented test.
Samples and catalog order
E-Chain® Expert call
Service life calculation
Ask the product expert
Designing with igus®
Other installation types
Option 1: Separators
Option 1 - Separators
Separators can be placed anywhere in the chain's cross-section to divide the interior of the e-chain® - As standard, separators are fitted every 2nd chain link!
Note: for E2C.10 Assemble the interior separation before fitting the e-chain®!
Standard separator - E2.10.2.ESD
For easy vertical division in energy chains. Separator can be positioned at any position in the cross-section. No snap-in option, moves freely.
Plastic - Pivoting on both sides
Data protection declaration